we try to install our first RED 10 at the moment.
Connection is up an the RED is shown as online in the RED management.
When we connect a notebook to a LAN port at the RED we get the following DHCP logs:
2013:07:11-11:26:13 astaro-1 dhcpd: DHCPDISCOVER from 54:53:ed:b6:30:fe (VAIO) via reds1
2013:07:11-11:26:13 astaro-1 dhcpd: DHCPOFFER on 192.168.1.10 to 54:53:ed:b6:30:fe (VAIO) via reds1
2013:07:11-11:26:21 astaro-1 dhcpd: DHCPDISCOVER from 54:53:ed:b6:30:fe (VAIO) via reds1
2013:07:11-11:26:21 astaro-1 dhcpd: DHCPOFFER on 192.168.1.10 to 54:53:ed:b6:30:fe (VAIO) via reds1
2013:07:11-11:26:38 astaro-1 dhcpd: DHCPDISCOVER from 54:53:ed:b6:30:fe (VAIO) via reds1
2013:07:11-11:26:38 astaro-1 dhcpd: DHCPOFFER on 192.168.1.10 to 54:53:ed:b6:30:fe (VAIO) via reds1
So i think the connection to the RED device is ok but there are some problems getting an ip from the DHCP server.
Also we are getting the following RED logs:
2013:07:11-11:32:12 astaro-2 red_server[7811]: SELF: RED server can only be run in master mode
2013:07:11-11:32:20 astaro-1 red_server[28368]: SELF: New connection from 88.X.X.X with ID A32*********X (cipher RC4-SHA), rev1
2013:07:11-11:32:20 astaro-1 red_server[28368]: A32*********X : already connected, releasing old connection
2013:07:11-11:32:20 astaro-1 red_server[28368]: A32*********X : disconnecting
2013:07:11-11:32:20 astaro-1 red_server[28368]: A32*********X : removing
2013:07:11-11:32:20 astaro-1 red_server[1452]: A32*********X : connected OK, pushing config
2013:07:11-11:32:27 astaro-2 red_server[7886]: SELF: Compiled-in firmware version is 14
2013:07:11-11:32:27 astaro-2 red_server[7886]: SELF: Rev2 version set to 15R2
2013:07:11-11:32:27 astaro-2 red_server[7886]: SELF: IO::Socket::SSL Version: 1.31
2013:07:11-11:32:27 astaro-2 red_server[7886]: SELF: Startup - waiting 15 seconds ...
2013:07:11-11:32:28 astaro-1 red_server[1452]: A32*********X : command 'PING 0'
2013:07:11-11:32:28 astaro-1 red_server[1452]: A32*********X : PING remote_tx=0 local_rx=0 diff=0
2013:07:11-11:32:28 astaro-1 red_server[1452]: A32*********X : PONG local_tx=0
2013:07:11-11:32:42 astaro-2 red_server[7890]: UPLOAD: Uploader process starting
2013:07:11-11:32:42 astaro-2 red_server[7886]: SELF: (Re-)loading device configurations
2013:07:11-11:32:42 astaro-2 red_server[7886]: SELF: RED server can only be run in master mode
2013:07:11-11:32:44 astaro-1 red_server[1452]: A32*********X : command 'PING 1'
2013:07:11-11:32:44 astaro-1 red_server[1452]: A32*********X : PING remote_tx=1 local_rx=1 diff=0
2013:07:11-11:32:44 astaro-1 red_server[1452]: A32*********X : PONG local_tx=1
2013:07:11-11:32:57 astaro-2 red_server[7914]: SELF: Compiled-in firmware version is 14
2013:07:11-11:32:57 astaro-2 red_server[7914]: SELF: Rev2 version set to 15R2
2013:07:11-11:32:57 astaro-2 red_server[7914]: SELF: IO::Socket::SSL Version: 1.31
2013:07:11-11:32:57 astaro-2 red_server[7914]: SELF: Startup - waiting 15 seconds ...
2013:07:11-11:33:00 astaro-1 red_server[1452]: A32*********X : command 'PING 4'
2013:07:11-11:33:00 astaro-1 red_server[1452]: A32*********X : PING remote_tx=4 local_rx=4 diff=0
2013:07:11-11:33:00 astaro-1 red_server[1452]: A32*********X : PONG local_tx=4
2013:07:11-11:33:12 astaro-2 red_server[7920]: UPLOAD: Uploader process starting
2013:07:11-11:33:12 astaro-2 red_server[7914]: SELF: (Re-)loading device configurations
2013:07:11-11:33:12 astaro-2 red_server[7914]: SELF: RED server can only be run in master mode
2013:07:11-11:33:27 astaro-1 red_server[28368]: SELF: New connection from 88.X.X.X with ID A3200855DFBD449 (cipher RC4-SHA), rev1
2013:07:11-11:33:27 astaro-1 red_server[28368]: A32*********X : already connected, releasing old connection
2013:07:11-11:33:27 astaro-1 red_server[28368]: A32*********X : disconnecting
2013:07:11-11:33:27 astaro-1 red_server[28368]: A32*********X : removing
2013:07:11-11:33:27 astaro-1 red_server[1736]: A32*********X : connected OK, pushing config
2013:07:11-11:33:27 astaro-2 red_server[7943]: SELF: Compiled-in firmware version is 14
2013:07:11-11:33:27 astaro-2 red_server[7943]: SELF: Rev2 version set to 15R2
2013:07:11-11:33:27 astaro-2 red_server[7943]: SELF: IO::Socket::SSL Version: 1.31
2013:07:11-11:33:27 astaro-2 red_server[7943]: SELF: Startup - waiting 15 seconds ...
Are these logs ok or is there something wrong in our config
Thanks
This thread was automatically locked due to age.
