Thread Info
  • State Not Answered
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 12 replies
  • Subscribers 3 subscribers
  • Views 13920 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

[9.101-12] RED50 restart loop

hasekamin
Our RED50 seems to disconnect after a certain amount of time and starts to reboot in a loop with the log entry "Overflow happened on reds1:0"

Here the complete log with changed ip addresses and ID

2013:06:14-07:43:27 firewall-1 red_server[4924]: SELF: New connection from 111.111.111.111 with ID A00000000000000 (cipher RC4-SHA), rev1
2013:06:14-07:43:27 firewall-1 red_server[4924]: SELF: Starting REDv2 protocol
2013:06:14-07:43:27 firewall-1 red_server[4924]: A00000000000000: connected OK, pushing config
2013:06:14-07:43:27 firewall-1 red_server[4924]: A00000000000000: Sending PEERS+222.222.222.222
2013:06:14-07:43:30 firewall-1 red_server[4924]: A00000000000000: command 'UMTS_STATUS value=OK'
2013:06:14-07:43:30 firewall-1 red_server[4924]: A00000000000000: command 'PING 0 uplink=WAN'
2013:06:14-07:43:30 firewall-1 red_server[4924]: A00000000000000: PING remote_tx=0 local_rx=0 diff=0
2013:06:14-07:43:30 firewall-1 red_server[4924]: A00000000000000: PONG local_tx=0
2013:06:14-07:43:41 firewall-1 red2ctl[25080]: Overflow happened on reds1:0
2013:06:14-07:43:41 firewall-1 red2ctl[25080]: Missing keepalive from reds1:0, disabling peer 111.111.111.111
2013:06:14-07:43:46 firewall-1 red_server[4924]: A00000000000000: command 'PING 0 uplink=WAN'
2013:06:14-07:43:46 firewall-1 red_server[4924]: A00000000000000: PING remote_tx=0 local_rx=0 diff=0
2013:06:14-07:43:46 firewall-1 red_server[4924]: A00000000000000: PONG local_tx=0
2013:06:14-07:43:51 firewall-1 red2ctl[25080]: Received keepalive from reds1:0, enabling peer 111.111.111.111
2013:06:14-07:44:01 firewall-1 red_server[4924]: A00000000000000: command 'PING 0 uplink=WAN'
2013:06:14-07:44:01 firewall-1 red_server[4924]: A00000000000000: PING remote_tx=0 local_rx=0 diff=0
2013:06:14-07:44:01 firewall-1 red_server[4924]: A00000000000000: PONG local_tx=0
2013:06:14-07:44:05 firewall-1 red_server[5212]: SELF: New connection from 111.111.111.111 with ID A00000000000000 (cipher RC4-SHA), rev1
2013:06:14-07:44:05 firewall-1 red_server[5212]: A00000000000000: already connected, releasing old connection
2013:06:14-07:44:31 firewall-1 red2ctl[25080]: Missing keepalive from reds1:0, disabling peer 111.111.111.111


I think this issue was already reported under Mantis ID #25375 in the beta forum but it still not seems to be fixed in the current release 9.101-12 which we are using. 

Are there any updates on this or maybe workarounds to temporary fix the issue?

The only workaround I found is powering off/on the RED50 manually. 

Since this does not work on remote site I have to wait until this bug is fixed before I can use the red50 in a live system.


This thread was automatically locked due to age.
Parents
  • 0
    Hi hasekamin,
    your problem is indeed related to your static ip in combination with the 24h reconnect. We know what's wrong and are working on it. For now there is unfortunately no workarround I could tell you if you rely on a static IP.
    I keep you posted.
    Greetings,
    Andreas
  • 0 in reply to treskaan
    Hi hasekamin,
    your problem is indeed related to your static ip in combination with the 24h reconnect. We know what's wrong and are working on it. For now there is unfortunately no workarround I could tell you if you rely on a static IP.
    I keep you posted.
    Greetings,
    Andreas


    I´m having the same problem in firmware version: 9.105-9.
    Is this not fixed yet ?

    The temporary solution is not use static IP ?

    Thanks !
Reply
  • 0 in reply to treskaan
    Hi hasekamin,
    your problem is indeed related to your static ip in combination with the 24h reconnect. We know what's wrong and are working on it. For now there is unfortunately no workarround I could tell you if you rely on a static IP.
    I keep you posted.
    Greetings,
    Andreas


    I´m having the same problem in firmware version: 9.105-9.
    Is this not fixed yet ?

    The temporary solution is not use static IP ?

    Thanks !
Children
  • 0 in reply to caprocha
    Hi hasekamin,
    your problem is indeed related to your static ip in combination with the 24h reconnect. We know what's wrong and are working on it. For now there is unfortunately no workarround I could tell you if you rely on a static IP.
    I keep you posted.
    Greetings,
    Andreas


    I´m having the same problem in firmware version: 9.105-9.
    Is this not fixed yet ?

    The temporary solution is not use static IP ?

    Thanks !


    Any news on this subject ????
  • 0 in reply to caprocha

    have same problem..
    red is running tunnel is up WAN1, and UTM status is up with some traffic..
    but after a minute reds going shutting down again.. and reboot..
    Already try using 2 ISP for the link (WAN1) still have same problem..

Unfiltered HTML