Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 2 subscribers
  • Views 11125 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

problem with red after update to 9.100-16

sebastian.mair
hello,

after update to 9.100-16 the red gets its firmware and after reboot or shutdown the reds comes never online again.

any ideas or hints?

the red blinks constantly on system, router,internet, tunnel is dark

and then the red restarts to the same procedure.

kind regards,

sebastian


This thread was automatically locked due to age.
Parents
  • 0
    I have the same probleme, after update UTM, the RED do not respond.  The log UTM say :

    2013:06:02-11:11:10 UTM-1 red_server[4090]: SELF: Overlay-fw has been updated ...
    2013:06:02-11:11:10 UTM-1 red_server[4624]: UPLOAD: Uploader process starting
    2013:06:02-11:11:11 UTM-1 red_server[4090]: SELF: (Re-)loading device configurations
    2013:06:02-11:11:11 UTM-1 red_server[4090]: 7172*********: New device
    2013:06:02-11:11:12 UTM-1 red_server[4090]: A3200******XX: New device
    2013:06:02-11:11:12 UTM-1 red_server[4090]: A3200******XX: Staging config for upload
    2013:06:02-11:11:12 UTM-1 red_server[4624]: UPLOAD: [A3200******XX] Error while uploading config to registry service, waiting 10 seconds
    2013:06:02-11:11:21 UTM-1 red_server[4090]: SELF: (Re-)loading device configurations
    2013:06:02-11:11:25 UTM-1 red_server[4624]: UPLOAD: [A3200******XX] Uploaded config to registry service


    I can't reboot the RED not accessible. Have you got an idéa ?
Reply
  • 0
    I have the same probleme, after update UTM, the RED do not respond.  The log UTM say :

    2013:06:02-11:11:10 UTM-1 red_server[4090]: SELF: Overlay-fw has been updated ...
    2013:06:02-11:11:10 UTM-1 red_server[4624]: UPLOAD: Uploader process starting
    2013:06:02-11:11:11 UTM-1 red_server[4090]: SELF: (Re-)loading device configurations
    2013:06:02-11:11:11 UTM-1 red_server[4090]: 7172*********: New device
    2013:06:02-11:11:12 UTM-1 red_server[4090]: A3200******XX: New device
    2013:06:02-11:11:12 UTM-1 red_server[4090]: A3200******XX: Staging config for upload
    2013:06:02-11:11:12 UTM-1 red_server[4624]: UPLOAD: [A3200******XX] Error while uploading config to registry service, waiting 10 seconds
    2013:06:02-11:11:21 UTM-1 red_server[4090]: SELF: (Re-)loading device configurations
    2013:06:02-11:11:25 UTM-1 red_server[4624]: UPLOAD: [A3200******XX] Uploaded config to registry service


    I can't reboot the RED not accessible. Have you got an idéa ?
Children
No Data
Unfiltered HTML