I have a ASG setup at home. I have a second ASG that I will call UTM-RED that I want to act as a RED. Since the wizard does not support UTM as a RED, I guess I have to do it all by hand. Here is what I have so far.
1. Setup RED management on the home ASG.
2. Generated the RED file
3. Imported the RED file on the UTM-RED.
4. Connection established to the home ASG.
5. I created an interface on the home ASG for the red with the IP 192.168.9.254.
6. I created a DHCP server on the home ASG for the red interface.
7. I created an interface on the UTM-RED with the IP 192.168.9.253
8. I can ping from the UTM-RED to the home ASG.
I want clients on the UTM-RED side to have 192.168.9.x addresses from the home ASG. The client currently have static 192.168.10.x addresses. The LAN side of the UTM-RED is 192.168.10.200. I also want all traffic to flow through the RED tunnel. It should fail closed otherwise.
How do I have the UTM-RED hand out 192.168.9.x addresses?
How do I have the UTM-RED pass all traffic through the RED tunnel?
How do I ensure that the UTM-RED fails closed on a disconnect?
Thanks for your help!
This thread was automatically locked due to age.
