This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED and DHCP Options?

I currently have Astaro doing DHCP with a tftp-server-name option 66, which I use to help configure SIP phones. It does not seem that Astaro passes this down to a RED box. Are there any options?

Set Up.

Internal LAN is on 172.16.10.x/24 with Astaro handling DHCP and a tftp-server-name (option 66) set to a static of 172.16.10.50, which is my Asterisk server. All the phones on this lan tftp boot fine and work as expected.

I have a RED set up at a remote office on 172.16.30.x/24, with a polycom phone set to tftp boot per dhcp options.

I have verified that I can access all the necessary ports from the 172.16.30.x network. i.e. I can ping host, netcat to udp port, etc...

This thread was automatically locked due to age.

0 chad131 over 11 years ago

alternatively, is it possible to get the remote end of the RED box to also be on the 172.16.10.x/24 network?
Cancel
Vote Up 0 Vote Down

Cancel
0 BAlfson over 11 years ago

Hi, Chad, and welcome to the User BB!

alternatively, is it possible to get the remote end of the RED box to also be on the 172.16.10.x/24 network?

It's not clear to me why your current setup isn't working, but the alternative may be better for you anyway. Just delete the interface definition for 172.16.30.x/24 and then bridge the reds# object to your Internal interface.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel