Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 4777 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED as default gateway but no DHCP server

StephanG
Hello,

i want the RED device to act as the default gateway. But without acting as a DHCP server.

I have a DC acting like a DHCP server with different VLANs at the branch office.

But i don't know where to set this ?

At the moment i have:
Uplink Mode (with my settings)
Operation Mode: Standard / Split (which includes the DHCP i think)

Is it impossible to set it like this ?

Greets
Stephan


This thread was automatically locked due to age.
Parents
  • 0
    Hi Stephan,

    The RED's DHCP server is just like any other one in the UTM so is found under "Network Services" >> "DHCP"

    We're running a similar setup in two offices except that we use an Essentials Edition as the default gateway with static routing to the RED. We do that because the RED's 'fail close' when they lose communications with the host UTM and while our offices can afford to lose their link to HQ, they can't lose the internet
  • 0 in reply to TheDrew
    Hello,

    thanks a lot for the answer. I thought this is a strict setting because it is not mentioned anywhere that you can change it.

    I will try it as soon as i come home. 

    Greets
    Stephan
Reply Children
No Data
Unfiltered HTML