Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 2 subscribers
  • Views 1698 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless Clients Through RED?

tuscani
Greetings all, just curious if there is some trick to get wireless users on a remote network access to the primary network through the RED? I have no issues if I physically connect clients to one of the RED LAN ports. Do I need a wireless AP30 instead of the nertgear on the remote LAN?

Comcast Modem > Internet port on Netgear Wireless Router > LAN port on Netgear Wireless Router > WAN port on RED

Remote home office network is 192.168.1.x
Primary Network is 192.168.0.x

Tunnel mode is Transparent / Split

I did add the the correct split networks already


This thread was automatically locked due to age.
Parents
  • 0
    Hey tuscani,

    If you use the netgear router for your WLAN clients, the traffic doesn't go through the RED. So you cannot reach your Network behind your ASG.

    Use can use an additional Access Point that's behind the red or use an APxx from sophos.

    VG
    Peter
Reply
  • 0
    Hey tuscani,

    If you use the netgear router for your WLAN clients, the traffic doesn't go through the RED. So you cannot reach your Network behind your ASG.

    Use can use an additional Access Point that's behind the red or use an APxx from sophos.

    VG
    Peter
Children
No Data
Unfiltered HTML