This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wireless Clients Through RED?

Greetings all, just curious if there is some trick to get wireless users on a remote network access to the primary network through the RED? I have no issues if I physically connect clients to one of the RED LAN ports. Do I need a wireless AP30 instead of the nertgear on the remote LAN?

Comcast Modem > Internet port on Netgear Wireless Router > LAN port on Netgear Wireless Router > WAN port on RED

Remote home office network is 192.168.1.x
Primary Network is 192.168.0.x

Tunnel mode is Transparent / Split

I did add the the correct split networks already

This thread was automatically locked due to age.

Parents

0 treskaan over 12 years ago

Hi,
you will need an Astaro/Sophos Access Point to do the task. It has not to be an AP30. The AP10 or AP50 will work as well. And in case you have a RED device with an USB port and the V9 you can also buy the AP5 which is designed to connect just a few clients via the RED in you branch office.
Greetings,
Andreas
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 treskaan over 12 years ago

Hi,
you will need an Astaro/Sophos Access Point to do the task. It has not to be an AP30. The AP10 or AP50 will work as well. And in case you have a RED device with an USB port and the V9 you can also buy the AP5 which is designed to connect just a few clients via the RED in you branch office.
Greetings,
Andreas
Cancel
Vote Up 0 Vote Down

Cancel

Children

0 tuscani over 12 years ago in reply to treskaan

Appreciate the reply.. I have a spare AP10 here that I will try. Do I need to turn off the wireless on the existing netgear router then meaning I am essentially create an entirely new wireless network.
Cancel
Vote Up 0 Vote Down

Cancel