Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 1695 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple Subnets over RED

TheDrew
Quick question about RED10 config.

I have a branch office (192.168.16.x) that needs to access resources at head office that are spread over two subnets (10.1.0.x && 10.2.0.x). The current soho vpn router already has that capability as it shows two active IPSEC SA's, one for each subnet @ HQ.

My question is, can RED do the same in split mode?

I know it can in regular mode however given that we need the internet to remain up even if the VPN is down, we need to use split mode.


This thread was automatically locked due to age.
Parents
  • 0
    Drew, If I understand correctly, the answer is yes.  Just put (guessing) "Internal (Network)" and "DMZ (Network)" in 'Split networks'.  If you have an internal web server they need t reach via the RED, then probably you'll want to select "Transparent/Split mode.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    Drew, If I understand correctly, the answer is yes.  Just put (guessing) "Internal (Network)" and "DMZ (Network)" in 'Split networks'.  If you have an internal web server they need t reach via the RED, then probably you'll want to select "Transparent/Split mode.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML