Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 2 subscribers
  • Views 4866 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED VPN Access problem

deltaline-IT
Hai,

astaro red 10 vpn access issue with standard/split mode.

HO- ASG 320 (live ip) -- LAN 10.0.0.0/24
 
branch - 
modem-----RED 10 -----LAN 10.0.1.0/24

VPN tunnel is up and no problem in access branch network from HO (after createring maqz rule  internal -----> branch) but  there is no access from branch to head office (tried firewall rule from HO to Branch full access ) no use.

do i am understanding the RED VPN  standard/split  it should send ho traffic to Astaro.

tracert from branch give result  
1     *           *      *       request time out
2  1ms        1ms              192.168.1.1  (which is router/modem at branch) then its going to internet (public hubs....)

what could be the reason why there is only one way traffic from HO to branch .

please help me to understand RED standard/split .


thanks in advance...


This thread was automatically locked due to age.
Parents
  • 0
    That's a picture of the Unified configuration.  If the problem is with Split, then that's what we need to see. [;)]

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    That's a picture of the Unified configuration.  If the problem is with Split, then that's what we need to see. [;)]

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML