Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 2 subscribers
  • Views 1627 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AP 10 behind a RED

Hyahya
Hello,

I'va an AP10 behind my RED and I can see it on the ASG but I can't find the SSID when I'm at the branch office. 
Has anyone configure a such scenario ?
Thanks


This thread was automatically locked due to age.
Parents
  • 0
    This is a very common combination.  It sounds like the configuration of the APs hasn't been completed in the Astaro.  The other possibility is that you have a router at your remote location that isn't routing 1.2.3.4 to the Astaro.  If you're running the RED as a split tunnel, add 1.2.3.4 to the RED tunnel in the Astaro.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    This is a very common combination.  It sounds like the configuration of the APs hasn't been completed in the Astaro.  The other possibility is that you have a router at your remote location that isn't routing 1.2.3.4 to the Astaro.  If you're running the RED as a split tunnel, add 1.2.3.4 to the RED tunnel in the Astaro.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML