Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 2 subscribers
  • Views 8349 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to setup a RED split tunnel?

Xfiring
So I just got my RED setup for our test network and started playing around with it.  Very cool I might add.

What I am having an issue figuring out is how can I setup a few devices to not go through the RED but directly out through the Internet via the local DSL router?

What would be ideal is if all devices would receive DHCP/Static IPs from the ASG via the RED, but the IPs I designate via static IP in ASG get bypassed.

I can't seem to find a way to accomplish this in the ASG.  Keep in mind we may have several REDs on the ASG so I'd like to split tunnel certain devices on each RED network.

Thanks


This thread was automatically locked due to age.
Parents
  • 0
    You have to do it with the physical wiring in the remote location.  Another way to think of the RED is to see it as a looooong Ethernet extension - whatever you can do with an Interface definition in the ASG applies.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0
    You have to do it with the physical wiring in the remote location.  Another way to think of the RED is to see it as a looooong Ethernet extension - whatever you can do with an Interface definition in the ASG applies.

    Cheers - Bob
     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML