Hello,
cause the docs are really not very precise I´ve got some basic questions and hope anybody here can help me.
- ASG 220 with FullGuard (v. 8.201)
=> IP Range 192.168.0.x
=> no DHCP in whole Network
=> Fixed WAN IP
=> Interface for RED added manually as Ethernet-Std. with fixed IP 192.168.1.2 => is this IP the same as the fixed in the RED-Setup ?
=> DNS RED(Network) allowed
=> Packet - Filter Red (Network) <> Internal (Network) allowed for any in both directions
=> NAT / Masq => Red (Network) to Uplink Interfaces allowed
=> IPS => Red (Network) added
=> Web-Filtering => Red (Network) added
- REDs added manualy and not with the wizzard
=> fixed IP 192.168.1.2
=> Router there is 192.168.1.1 with dynamic WAN-IP
=> Gateway 192.168.1.1
=> DNS is 192.168.1.1 => Is this correct ?
=> Splitt Mode
==> Internal (Network)
==> RED (Address)
=> Works in the branch as far as tunnel is established and surfing, etc. is possible with Gateway 192.168.1.2 on clients.
=> On ASG the Red is green.
=> No Ping or other traffic like TS is possible from 192.168.1.x <> 192.168.0.x - that´s my main problem - have I forgotten something?
Thank you
Tom
This thread was automatically locked due to age.
