Hello,
Given hardware: one RED10 device and one ASG
The connection between the two is established and working correctly.
RED 10 network scheme is : 192.168.4.0/24
ASG network scheme is: 192.168.3.0/24
The RED device configuration is :
Uplink mode: DHCP client
Routing mode: Unified
For the packet filter i have specifyed rules that give access only on the internal network of the ASG from the RED network.
The Pc that is connected to the RED device has two network cards :
- one that connects the Pc and the RED device and has 192.168.4.2 as IP (assigned by the ASG DHCP)
- and a wireless connection that connects the PC and the router that is before the RED device with 192.168.1.100 as IP (the network scheme of the router before the RED device is 192.168.1.0/24).
I've noticed that as soon as I plug in the cable between the RED device and the PC i'm not able any more to browse the internet via the wireless connection and is seems that all the trafic is redirected via the RED device.
I thought that the configuration of a split tunnel can be avoided using two network cards on the PC,but apparently it is not working.Did I do something wrong ?
Is there a way to keep the 2 connections working on the PC?
RED connection only for the internal network of the ASG and the WiFi only for the internet.
This thread was automatically locked due to age.
