This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED's Internet LED (Bug??)

Just received some more RED's today and tested some stuff with one of these.

I recognized that, after a tunnel was established and i disconnect the Ethernet cable, the Internet LED still shows a connection.

The Tunnel LED goes off after maybe 10 seconds. But the Internet LED stays on even after minutes. Thats not nice if you have to debug a problem and you think the internet connection is still fine, or if you have someone on the other side which only can say if a LED is on, off or blinking. It really should go off immediately if the cable is plugged out.

This thread was automatically locked due to age.

0 tov over 13 years ago

YES, same here. The LED stays ON....
Cancel
Vote Up 0 Vote Down

Cancel
0 Ölm over 13 years ago

It´s a known issue. As well the fact that the internet LED will turn on just after the RED devices has received a DHCP request - no matter whether it really has internet connection or not.
I heard it will be fixed, either in final 8.100 or some minor releases after.
Cancel
Vote Up 0 Vote Down

Cancel