[SIZE="3"]Does anyone have experience with the Failover internet access on RED ? Failover access will be critical in our environment, so If anyone has experience and can let me know if there are any special considerations or settings necessary.
I have tested failover with both Red using private IP DHCP from upstream ISP router, and Red using Public IP handed out by DHCP by cable modem.
With either config, as soon as I drop the wan interface on the ASG to simulate an outage, the tunnel drops as expected. When the tunnel drops clients on the RED LAN are no longer able to ping the LAN side IP on the RED. I was told that the RED would hold the config and reroute traffic to the internet causing the RED to function as a simple NAT device. Trouble is the LAN side IP (Gateway) for the RED clients disappears and the RED just spindles and RED does not failover to internet access.
I don't see any posts on the Failover capability of the RED....
Can someone provide a config example or advice
Thanks[SIZE="2"][/SIZE][/SIZE]
This thread was automatically locked due to age.
