Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 2 subscribers
  • Views 1206 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RED Devices and Version 8

stoner
Greeings All,

This is the first time I tried to configure a RED device under version 8 and I can't seem to find where you define the subnet for the interface.  The "Base IP" found on version 7 used to define the subnet seems to be missing.  The help screen does not appear to be updated from version 7.  BTW, the RED workes great on my version 7 device.  What am I diong Wrong?

Thanks in advance for everyone's help.


This thread was automatically locked due to age.
Parents
  • 0
    In version 8 you have to configure RED manually. Setup RED in RED MANAGEMENT, afterwards create a new interface => choose redsX as the interface. Finally create packetfilter rules, allow this network for DNS and setup a DHCP if necessary. That's it.
Reply
  • 0
    In version 8 you have to configure RED manually. Setup RED in RED MANAGEMENT, afterwards create a new interface => choose redsX as the interface. Finally create packetfilter rules, allow this network for DNS and setup a DHCP if necessary. That's it.
Children
No Data
Unfiltered HTML