Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 2 subscribers
  • Views 3061 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Route RED Traffic Through Specific Wan

tkeyser
I have 3 t-1 connections into our building, 2 1.5's and 1 meshed 3meg.  Currently all of our traffic runs through the 3meg but I'm looking to see if I can change that.  We have 5 remote facilities that I'm currently using ASG's with site to site VPN setup to connect them all.  I upgraded one facility to a RED two weeks ago and it seems to be working great.  I'm looking to upgrade the rest to RED's as well but I'd like to use my other 2 connections as dedicated lines for two of my other facilities that are a little larger.  My question is how would I setup a RED to route all of its traffic through one of the other connections?


This thread was automatically locked due to age.
Parents
  • 0
    As the "ASG hostname", use the IP address or DynDNS hostname that belongs to the ASG interface of the specific uplink. The RED will connect to that address, and answer traffic will also be sent out with that address.
Reply
  • 0
    As the "ASG hostname", use the IP address or DynDNS hostname that belongs to the ASG interface of the specific uplink. The RED will connect to that address, and answer traffic will also be sent out with that address.
Children
No Data
Unfiltered HTML