This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Tunnel Light not coming up?

At what point does the tunnel light come up? I believe that I have the RED correctly setup but the tunnel light doesn't ever come up.

thanks,
gatorbyte

This thread was automatically locked due to age.

0 Scott_Klassen over 14 years ago

Did you already do your setup for RED on your ASG?

Take a look at the Basics and Initial Setup documents in the knowledgebase and see if you've got things right. https://support.astaro.com/support/index.php/Category:RED

__________________
ACE v8/SCA v9.3

...still have a v5 install disk in a box somewhere.

http://xkcd.com
http://www.tedgoff.com/mb
http://www.projectcartoon.com/cartoon/1
Cancel
Vote Up 0 Vote Down

Cancel
0 gatorbyte over 14 years ago in reply to Scott_Klassen

I was able to get the tunnel light to come up when I was directly connected to the cable modem. That leads me to believe that my configuration is right but my home asg is blocking traffic. I checked and it looks like the packet filter is blocking port 67 and 68. I was able to allow those ports and I don't get the drop connections for that anymore. I also tried to allow port 3400 but I don't see that it is getting dropped or anything. Is there anything else that needs to be port forwarded?

gatorbyte
Cancel
Vote Up 0 Vote Down

Cancel
0 Jack Daniel over 14 years ago in reply to gatorbyte

The RED needs to be able to open outbound connections on port 3400 on both TCP and UDP. It also need to get a DHCP address, and resolve DNS. That's really all you should need.
Cancel
Vote Up 0 Vote Down

Cancel