This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Bridging RED60 to XG / No Wan acces

Hello,

We've got a problem on RED60. 

We need to use several Vlans on our RED60 (Data, Voip and Wifi). We use a Brigde and all Vlans are up.

But we don't have acces to the WAN.

The Bridge is configure on LAN zone. We had the subnet in our firewall rule for Wan access....but no way.

Do we need to setup a special NAT for the bridge ?

Regards.



This thread was automatically locked due to age.
  • Take one client from behind the bridge and try to open a webpage. Try to ping this webpage. Note the current Time.

    Open the LogViewer and filter for this Client. Try to find this access-attempts.

    Post the output. Possible, we can see something.

    PS: you are at the SG/UTM Forum here. Try to ask within XG forum ... possible you get more/better answers.


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.