Thread Info
  • State Suggested Answer
  • +3 person also asked this people also asked this
  • Locked Locked
  • Replies 39 replies
  • Answers 2 answers
  • Subscribers 13 subscribers
  • Views 148790 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Disconnect Loop RED 15 -

reFresh

Hi,

ich have a very strange problem with the new RED 15.

Setting:

UTM 9.350-12 at the main office

RED 15 with static IP behind an LTE-router at the remote location

After the first configuration everything works fine. But after some hours the RED diconnect and reconnected every minute.

After a reboot of the UTM (or if i deactivate the RED for some hours)  the connection is stable for some hours.

Here are some lines out of the RED log:

2015:11:10-16:42:48 che-igw01 red_server[20657]: A350124B7XXXXXX: command 'PING 0 uplink=WAN'
2015:11:10-16:42:48 che-igw01 red_server[20657]: A350124B7XXXXXX: PING remote_tx=0 local_rx=0 diff=0
2015:11:10-16:42:48 che-igw01 red_server[20657]: A350124B7XXXXXX:: PONG local_tx=0
2015:11:10-16:42:52 che-igw01 red_server[20939]: SELF: New connection from 2.200.175.176 with ID A350124B7XXXXXX: (cipher AES256-GCM-SHA384), rev1
2015:11:10-16:42:52 che-igw01 red_server[20939]: A350124B7XXXXXX:: already connected, releasing old connection.
2015:11:10-16:42:52 che-igw01 red_server[20657]: id="4202" severity="info" sys="System" sub="RED" name="RED Tunnel Down" red_id="A350124B7XXXXXX" forced="1"
2015:11:10-16:42:52 che-igw01 red_server[20657]: A350124B7XXXXXX: is disconnected.
2015:11:10-16:42:52 che-igw01 red2ctl[4266]: Overflow happened on reds2:0
2015:11:10-16:42:52 che-igw01 red2ctl[4266]: Missing keepalive from reds2:0, disabling peer 2.200.XXX.XXX
2015:11:10-16:42:52 che-igw01 red_server[4255]: SELF: (Re-)loading device configurations
2015:11:10-16:42:53 che-igw01 red_server[20939]: A350124B7XXXXXX:: connected OK, pushing config
2015:11:10-16:42:53 che-igw01 red_server[20939]: A350124B7XXXXXX:: Sending PEERS+178.15.XXX.XXX
2015:11:10-16:42:57 che-igw01 red_server[20939]: A350124B7XXXXXX:: command 'UMTS_STATUS value=OK'
2015:11:10-16:42:57 che-igw01 red_server[20939]: A350124B7XXXXXX:: command 'PING 0 uplink=WAN'
2015:11:10-16:42:57 che-igw01 red_server[20939]: id="4201" severity="info" sys="System" sub="RED" name="RED Tunnel Up" red_id="A350124B7XXXXXX:" forced="0"
2015:11:10-16:42:57 che-igw01 red_server[20939]: A350124B7XXXXXX:: PING remote_tx=0 local_rx=0 diff=0
2015:11:10-16:42:57 che-igw01 red_server[20939]: A350124B7XXXXXX:: PONG local_tx=0
2015:11:10-16:42:58 che-igw01 red_server[4255]: SELF: (Re-)loading device configurations
2015:11:10-16:42:59 che-igw01 red2ctl[4266]: Missing keepalive from reds2:0, disabling peer 2.200.XXX.XXX
2015:11:10-16:43:02 che-igw01 red2ctl[4266]: Received keepalive from reds2:0, enabling peer 2.200.XXX.XXX
2015:11:10-16:43:11 che-igw01 red_server[20939]: A350124B7XXXXXX:: command 'PING 0 uplink=WAN'
2015:11:10-16:43:11 che-igw01 red_server[20939]: A350124B7XXXXXX:: PING remote_tx=0 local_rx=0 diff=0
2015:11:10-16:43:11 che-igw01 red_server[20939]: A350124B7XXXXXX:: PONG local_tx=0
2015:11:10-16:43:26 che-igw01 red_server[20939]: A350124B7XXXXXX:: command 'PING 0 uplink=WAN'
2015:11:10-16:43:26 che-igw01 red_server[20939]: A350124B7XXXXXX:: PING remote_tx=0 local_rx=0 diff=0
2015:11:10-16:43:26 che-igw01 red_server[20939]: A350124B7XXXXXX:: PONG local_tx=0
2015:11:10-16:43:30 che-igw01 red_server[21136]: SELF: New connection from 2.200.XXX.XXX with ID A350124B7XXXXXX: (cipher AES256-GCM-SHA384), rev1
2015:11:10-16:43:30 che-igw01 red_server[21136]: A350124B7XXXXXX:: already connected, releasing old connection.
2015:11:10-16:43:30 che-igw01 red_server[20939]: id="4202" severity="info" sys="System" sub="RED" name="RED Tunnel Down" red_id="A350124B7XXXXXX:" forced="1"
2015:11:10-16:43:31 che-igw01 red_server[20939]: A350124B7XXXXXX: is disconnected.
2015:11:10-16:43:31 che-igw01 red_server[4255]: SELF: (Re-)loading device configurations
2015:11:10-16:43:32 che-igw01 red2ctl[4266]: Overflow happened on reds2:0
2015:11:10-16:43:32 che-igw01 red2ctl[4266]: Missing keepalive from reds2:0, disabling peer 2.200.XXX.XXX
2015:11:10-16:43:32 che-igw01 red_server[21136]: A350124B7XXXXXX:: connected OK, pushing config
2015:11:10-16:43:32 che-igw01 red_server[21136]: A350124B7XXXXXX:: Sending PEERS+178.15.XXX.XXX
2015:11:10-16:43:35 che-igw01 red2ctl[4266]: Overflow happened on reds2:0
2015:11:10-16:43:35 che-igw01 red2ctl[4266]: Missing keepalive from reds2:0, disabling peer 2.200.XXX.XXX
2015:11:10-16:43:35 che-igw01 red_server[21136]: A350124B7XXXXXX:: command 'UMTS_STATUS value=OK'
2015:11:10-16:43:35 che-igw01 red_server[21136]: A350124B7XXXXXX:: command 'PING 0 uplink=WAN'
2015:11:10-16:43:35 che-igw01 red_server[21136]: id="4201" severity="info" sys="System" sub="RED" name="RED Tunnel Up" red_id="A350124B7XXXXXX:" forced="0"
2015:11:10-16:43:35 che-igw01 red_server[21136]: A350124B7XXXXXX:: PING remote_tx=0 local_rx=0 diff=0
2015:11:10-16:43:35 che-igw01 red_server[21136]: A350124B7XXXXXX:: PONG local_tx=0
2015:11:10-16:43:41 che-igw01 red2ctl[4266]: Received keepalive from reds2:0, enabling peer 2.200.XXX.XX
Other RED devices (RED10) at the same UTM works fine.
Any ideas?



This thread was automatically locked due to age.
Parents
  • 0
    Hi everyone,

    I have been working with our team here to identify the best way to address the issue we are seeing.

    For everyone that has a current support contract, please open a support case, which will allow our team to look into this further.

    When I have an update on this issue, I will make sure it is communicated out to this thread.

    Thanks,

    Ted
  • 0 in reply to TedReynolds
    Anything new?? I have still have the problem, RED10 is working perfect RED15 is not working.
    Tunnel stay blinking but the UTM shows connected but with 0kb in and 0kb out!

    It is a serious problem and we are waiting for fix since 10th november.

    ....
Reply Children
  • 0 in reply to MaximilianMayer

    The same for me. The problem is still unsolved. Tried it with 3 different ISPs at 3 different locations and different connection types (unwired[LTE], wired with fix public IP and wired with dynamic public IP). But in all cases I see the same issue (RED connect-RED disconnect-RED connect,...). RED 10 works fine.

Unfiltered HTML