Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 3 subscribers
  • Views 3045 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Is WAN1 or WAN2 up?

Michael Bautch

We have a cellular backup connected on WAN2 for our locations. Currently I can't find anyway to see if the RED is using WAN1 or WAN2. Recently a few locations have used all of my shared data from AT&T because we never know.

 

Wondering if anyone has some kind of alert setup that notifies you of this.

 

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    Hi Michael and welcome to the UTM Community!

    Do I understand correctly that you have RED 50s in some locations and that the second uplink connection on each RED is connected to a cellular modem?  Do you have the INFO-727 RED connection is up again notification selected?  Whenever you see that you will want to check the 'Overview' tab in 'RED Management'.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi Michael and welcome to the UTM Community!

    Do I understand correctly that you have RED 50s in some locations and that the second uplink connection on each RED is connected to a cellular modem?  Do you have the INFO-727 RED connection is up again notification selected?  Whenever you see that you will want to check the 'Overview' tab in 'RED Management'.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML