Hey all,
I've got a question concerning a VPN tunnel we've set up. I dont have a lot of knowledge about this subject, so any help would be appreciated.
We've got 2 sites, lets call them Site A and Site B.
Site A is behind a Sophos UTM 9 with a local network 192.168.1.0/24
Site B is behind a Draytek 2960 with a local network of 10.30.1.0/24.
At this moment we've got a working VPN tunnel between these 2 networks.
But on Site B there is another subnet (192.168.0.0/24 with a printer on 192.168.0.250) which we are trying to connect to from Site A.
But I'm not entirely sure on how to get this done. Should I just add this second subnet to the Remote Gateway on the Sophos UTM and configure it on Site B as well?
Or do I need to do something entirely different?
Any advice would be greatly appreciated,
Frank
This thread was automatically locked due to age.