Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 18 replies
  • Answers 1 answer
  • Subscribers 6 subscribers
  • Views 17140 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Port Forwarding Problem

Cuong Vu

 Dear Group!

I was create NAT Rule following:

Rule Type: DNAT
Matching condition
For Traffice From: Any
Using Service: RDP
Going To: WAN
Acction
Change the Destination To: My Internal IP
and the Service to:
Automatic Firewall rule: Checked

But when i can't using RDP & the live log file as 

Pls tell me why and how to fix it?

Thanks



This thread was automatically locked due to age.
Parents
  • 0

    The settings look good. Is the destination address of the firewall screenshot the WAN or LAN address?

    First please check, if the DNAT rule is enabled. I mean new rules are disabled in standard, but I'm not sure.

    Then you should check and post the firewall rule. You can view them by selecting "Automatic Firewall rules" in the firewall settings.

    If everything looks fine, you should try to create a firewall rule by your own, and not automatically by the DNAT rule.

Reply
  • 0

    The settings look good. Is the destination address of the firewall screenshot the WAN or LAN address?

    First please check, if the DNAT rule is enabled. I mean new rules are disabled in standard, but I'm not sure.

    Then you should check and post the firewall rule. You can view them by selecting "Automatic Firewall rules" in the firewall settings.

    If everything looks fine, you should try to create a firewall rule by your own, and not automatically by the DNAT rule.

Children
Unfiltered HTML