This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

BJNP - Default Drops for Mac Client

Hello folks,

Setup a Mac Client on my mainly PC network.  Mac is running okay, but I see my firewall filled up with a load of default drops for BJNP 192.168.1.97:61164 -> 224.0.0.1:8612.

So the mac, is the 192.168.1.97 host.  It's clearly broadcasting Bonjour to the entire network.

I defined BNJP as a service, and the mac host.  Setup a rule in the firewall to allow the traffic.. but that did not help.  So something is blocking this, and I have dug thru the setting to no avail.

Any hints?  Thanks!

This thread was automatically locked due to age.

0 BAlfson over 10 years ago

Allan, the UTM isn't going to respond, so you can just drop the BNJP packets from the Mac - at least that will get the lines out of your log.

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 allandresner over 10 years ago

Ok, sounds like a plan and thanks for being "right there" [:D]
Cancel
Vote Up 0 Vote Down

Cancel