Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 19 replies
  • Subscribers 2 subscribers
  • Views 77233 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Access local werbservers

RChadwick
I've read the following guide: Accessing Internal or DMZ Webserver from Internal network (Astaro Security Gateway)

However, I haven't been able to get it to work. First, I have a number of HTTP devices locally (Web server, IP Cameras, etc..), but the guide seems to look for forwarding to a specific IP address. Is there a way to configure UTM9 to forward multiple Domain names (I have multiple) to multiple devices on the local network?


This thread was automatically locked due to age.
Parents
  • 0
    Hi, 

    Depending on how you have DNS set up in your network, creating static DNS entries in the firewall is usually a good solution.
    How do you have DNS set up internally?

    Also, are you using the http proxy or not?

    Barry
Reply
  • 0
    Hi, 

    Depending on how you have DNS set up in your network, creating static DNS entries in the firewall is usually a good solution.
    How do you have DNS set up internally?

    Also, are you using the http proxy or not?

    Barry
Children
No Data
Unfiltered HTML