Here is my setup:
2 internet connections on ETH1 & ETH3 of an ASG120
a 2WIRE DSL Modem on ETH3
Cable Modem on ETH1
I can access the Astaro right now only vie the cable connection on eth1
The 2WIRE DSL modem is doing the PPPoE connection and is setup to do a Public Proxy NAT translation to one of 5 static public IP's to eth3 on the Astaro.
The eth3 interface is connected to the 2WIRE modem and is set to Cable (DHCP) mode MTU1492 and being statically assigned a public IP address from our IP pool through the 2WIRE modem . The modem is doing Public Proxy in NAT mode to the between the Astaro and the public IP address through a reservation matched to the MAC address of eth3 in the Public Proxy NAT setup. The Astaro eth3 is being assigned ONLY the public IP address and not a 192.168.1.x address.
I am having problems with the setup so I would like to access the 2WIRE management interface but can't unless I am connected directly to the DSL modem internally using a 192.168.1.0 address talking to the modem at 192.168.1.254.
The Astaro eth3 address is assigned a public IP address due to the MAC reservation in the DSL modem. I would like to change the MAC address on eth3 so I can then have eth3 pull a 192.168 address from the DSL modem then do a Destination or Source NAT rule to access the interface on the DSL modem.
How would I do a DNAT/SNAT setup to access the interface of the DSL modem? I would be coming in on eth1:8888 and want to map the traffic to http port 80 out eth3 to 192.168.1.254 but appearing to come from a 192.168.1.x address.
I am not sure if this is even possible because the DSL modem may not honor any traffic appearing to come from the mac address assigned the Public IP Nat as a 192.168.1.x source. If this is the case I thought that if I could change the MAC address on the Astaro eth3, I could pull a 192.168.1.x IP address then use the DNAT/SNAT rule to access the interface. How do I modify the MAC address on an interface on the Astaro?
I really don't want to have to go back on-site because it is a long trip.
This thread was automatically locked due to age.
