This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with p2p/Emule I made screenshot with configuration, please check.

Hi to all,
I have problems with Astaro configuration for Emule. If I test the ports in Emule i got a empty site:


I have test in the last 3 days several configurations and I have read here all post about UDP and Emule Issue. I realy have problems to solve this Issue.
I hope somebody can give me some helping hands. I appreciate any responds.

Here I made screenshot with my configurations:




If I test my TCP Port 5555 with port scanner I got "success open port".
Thank you very much in advance.
Best regards
Elena


This thread was automatically locked due to age.
Parents
  • @BarryG

    Thank you very, very, very much for helping me. [;)]
    I've made same configurations you recommend, and I will try if eMule work correctly.
    At the first I can connect to the Server's.
    Now I need to configure Emule in detail about IP-Filter, AntiLeech....

    The only question I have at the moment is, why the Internal Port Test from programm Emule didn't work. I got empty page (the ports in screen isn't right, I take the same screen from my first post.):

    Did you have same Issue.
    Best regards
    Elena
Reply
  • @BarryG

    Thank you very, very, very much for helping me. [;)]
    I've made same configurations you recommend, and I will try if eMule work correctly.
    At the first I can connect to the Server's.
    Now I need to configure Emule in detail about IP-Filter, AntiLeech....

    The only question I have at the moment is, why the Internal Port Test from programm Emule didn't work. I got empty page (the ports in screen isn't right, I take the same screen from my first post.):

    Did you have same Issue.
    Best regards
    Elena
Children