Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 2 subscribers
  • Views 71357 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with p2p/Emule I made screenshot with configuration, please check.

Elena
Hi to all,
I have problems with Astaro configuration for Emule. If I test the ports in Emule i got a empty site:


I have test in the last 3 days several configurations and I have read here all post about UDP and Emule Issue. I realy have problems to solve this Issue.
I hope somebody can give me some helping hands. I appreciate any responds.

Here I made screenshot with my configurations:




If I test my TCP Port 5555 with port scanner I got "success open port".
Thank you very much in advance.
Best regards
Elena


This thread was automatically locked due to age.
Parents
  • 0
    To allow the dropped traffic from the packet filter log you will need a packet filter rule with:
    source: 192.168.254.22
    service: Emule UDP IN
    Destination: Any

    You may want to just create a packet filter rule that allows all services for that computer while you troubleshoot the issue, then watch the log and create specific packet rules once you get it working.
Reply
  • 0
    To allow the dropped traffic from the packet filter log you will need a packet filter rule with:
    source: 192.168.254.22
    service: Emule UDP IN
    Destination: Any

    You may want to just create a packet filter rule that allows all services for that computer while you troubleshoot the issue, then watch the log and create specific packet rules once you get it working.
Children
No Data
Unfiltered HTML