Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 2 subscribers
  • Views 71357 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with p2p/Emule I made screenshot with configuration, please check.

Elena
Hi to all,
I have problems with Astaro configuration for Emule. If I test the ports in Emule i got a empty site:


I have test in the last 3 days several configurations and I have read here all post about UDP and Emule Issue. I realy have problems to solve this Issue.
I hope somebody can give me some helping hands. I appreciate any responds.

Here I made screenshot with my configurations:




If I test my TCP Port 5555 with port scanner I got "success open port".
Thank you very much in advance.
Best regards
Elena


This thread was automatically locked due to age.
Parents
  • 0
    Hi, normally you need Service Definitions for both incoming and outgoing traffic for p2p apps...

    e.g.
    emule-out-tcp
    source: 5555
    dest: 1-65535

    emule-out-udp
    source: 6666
    dest: 1-65535

    emule-in-tcp
    source: 5555
    dest: 1-65535

    emule-in-tcp
    source: 1-65535
    dest: 6666


    These defs can also be used for QOS.

    Barry
Reply
  • 0
    Hi, normally you need Service Definitions for both incoming and outgoing traffic for p2p apps...

    e.g.
    emule-out-tcp
    source: 5555
    dest: 1-65535

    emule-out-udp
    source: 6666
    dest: 1-65535

    emule-in-tcp
    source: 5555
    dest: 1-65535

    emule-in-tcp
    source: 1-65535
    dest: 6666


    These defs can also be used for QOS.

    Barry
Children
  • 0 in reply to BarryG
    Hi BarryG, thank you very much for your respond, I'm very happy.
    But unfortunately I didn't solve problem.

    I still have the problem.
    I have read again last three days all post here about "portforwarding", "Torrent", "Edonkey", but I don't understand why didn't work for me.
    Now I have made these packet rules:




    I have see in "Live-Protocol" port 6666 is still "dropped".
    I will really donate here or pay for solving problem. I will pay 50 Euro for solution. 
    Maybe the reason is of because bad image of Emule.
    Here in Switzerland is downloading of media legal, only sharing with others is violent. 

    I hope somebody have Idea what could be the problem.
    Thank you very, very, very much in advance.

    Namaste
    Elena
Unfiltered HTML