We have an Astaro V7 at our HQ, remote sites attached via VPN (not necessarily having astaro at their end).
We have a WSUS server at HQ and WSUS proxies at the remote sites, which regularly sync their data from HQ.
In order not to flood possibly small remote site uplinks, I wanted to cap bandwidth for such syncing to 100kbps.
For this I configured two Traffic Selectors:
HQ-WSUS -> Any -> Any
and
Any -> Any -> HQ-WSUS
I added a bandwidth pool to "Internet" interface with guaranteed 10kbps and upper bandwidth 100kpbs and both traffic selectors checked and enabled it ("green").
It seems that this does not work (I have an ongoing synchronization at a permanent rate of about 130kBps, i.e. about 10 times the allowed speed or the full bandwidth of that tiny remote link).
Do I need to enable global bandwidth limitations for my interfaces (under Network -> Quality of Service (QoS) -> Status) for things to work? I tried so, but no change.
I tried to add a bandwitdh pool to "Internal" interface with same settings and selectors, but this does not change anything, either.
This thread was automatically locked due to age.
