This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Understanding question to SNAT/DNAT

Hi all,
I have here a ASL 5 with the following constellation.
3 NIC Inernal / DMZ / External (2xx.xxx.xxx/128)
In the DMZ works a Apache with some virtual servers (IP)

In the first attempt I generated corresponding virtual NIC at the external NIC (25 pcs.).
In addition I activated the following SNAT.

Any -> Virtual-Nic (Adress) -> httpd -> internal Webserver(DMZ)

The interesting is this SNAT functioned only with some (same parameter!)

With the second attempt I generate host with the external IP addresses in network definition.

With this constellation SNAT works correctly. Which wrong I make in the first attempt ?

What would here the correct way ?

thx

Stefan


This thread was automatically locked due to age.
Parents Reply
  • I'm having trouble following you, but /128 is not a valid netmask.

    Please post your complete external network configuration.
    Please do not xxx out the last octet.

    e.g.
    Addresses of each virtual NIC
    217.xxx.xxx.???
    217.xxx.xxx.???
    217.xxx.xxx.???
    ...

    NETMASK
    DO NOT XXX out this

    GATEWAY
    217.xxx.xxx.???


    Barry
Children
No Data