This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Single WAN with multiple port to different LAN internal IPs

Hi guys, 

I’m trying to NAT (or DNAT) Single WAN with multiple ports to Internal LAN IPs. Just wondering what’s the best way to do it.

Example:

WAN 40.12.34.56:1000 to 192.168.1.5

WAN 40.12.34.56:2000 to 192.168.1.6

WAN 40.12.34.56:3000 to 192.168.1.7



This thread was automatically locked due to age.
Parents
  • สวัสดี ครับ and welcome to the UTM Community!

    In addition to the comments by Raphael and Dirk, In addition to #2 in Rulz, you may want to consider several of the others.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • สวัสดี ครับ and welcome to the UTM Community!

    In addition to the comments by Raphael and Dirk, In addition to #2 in Rulz, you may want to consider several of the others.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data