This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UTM Home - Bridge mode

I am a self confessed geek. I have a geek lodger  Therefore I have more than 50 devices.

25 IP cams, 15 Sonos, 10 Smart TVs 7 managed switches to mention a few.

As a result when I get my new internet connection next month I want to keep some devices outside the remit of the 50 licence Sophos firewall but the important ones / data inside.  The problem is that sonos for example doesn't work across subnets.

My thought was to have my firewall bridging between two VLANS both using the same IP address space. I have three 1G ethernet cards (two decent intel) in my UTM.

Has anyone done similar or have any advice ?  If the cost were reasonable Id consider a paid for product but I will have a 1G symmetrical service so whilst use is fairly modest the spec of a firewall might be quite high.



This thread was automatically locked due to age.
Parents Reply
  • It's the same as UTM, free for a home license.

    I'll warn you it's not the same as UTM and is... different to manage.  I think the only reason why I don't run it yet is because of the nightmare of learning it over again.  I'll eventually do so when I get the time, hah.

    OPNSense 64-bit | Intel Xeon 4-core v3 1225 3.20Ghz
    16GB Memory | 500GB SSD HDD | ATT Fiber 1GB
    (Former Sophos UTM Veteran, Former XG Rookie)

Children
No Data