This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Static Routing to different gateways with excluded IP addresses from a network

Hi there,

i have an internal network that i want to route to a second uplink that routes packets to a network e.g.

But some target ip addresses like and from the target network should be routed through the default WAN interface and not the second uplink Source is the given internal network

I have especially a problem with the understanding of NAT in this case as the network needs to be natted with one interface. Here i can choose of course my second interface uplink In this case all traffic from the source network would be leaded out through the second uplink. But what about the excluded target ips?

How would i achieve this task most suitable.

This thread was automatically locked due to age.
Parents Reply Children
No Data