Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 1357 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cisco VPN client access to UTM is ok, but can't route out?

GKR

Hi,

I can successfully connect to my UTM9 using the Cisco VPN client on my IOS device. 
I can ping internal ip's (192.168.0.0/24 range) and the public IP adress as well from my IOS device.

But I can't access any public IP's, let's say 1.1.1.1 for example, just the internal IP's.

Do I have to setup anything specific probably?

I can ping 1.1.1.1 directly from any internal IP's, but not from my IOS device that connects using the Cisco VPN ipsec tunnel.

Please help ;)



This thread was automatically locked due to age.
Parents
  • +1

    Hi  

    Have you configured any Masquerading rule for the Cisco VPN Pool? Please configure a Masquerading rule and make sure that you have created a Firewall rule as well for Cisco VPN Pool to go out on the Internet.

    Kindly check this and let me know if it helps.

    Regards

    Jaydeep

Reply
  • +1

    Hi  

    Have you configured any Masquerading rule for the Cisco VPN Pool? Please configure a Masquerading rule and make sure that you have created a Firewall rule as well for Cisco VPN Pool to go out on the Internet.

    Kindly check this and let me know if it helps.

    Regards

    Jaydeep

Children
No Data
Unfiltered HTML