This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hotspot QOS/throttling

I have created a guest hotspot (separate zone), and noticed that the speed is being throttled somehow (around 3mbps on a 160mbps connection). I cant seem to find out why, there are no qos settings enabled as far as I can see.

on another wireless network bridged to lan through the same AP, the speed is as expected.

This thread was automatically locked due to age.

Parents

0 BAlfson over 5 years ago

Hi Jon and welcome to the UTM Community!

What, if anything, do you learn by doing #1 in Rulz (last updated 2019-04-17)?

Cheers - Bob

Sophos UTM Community Moderator
Sophos Certified Architect - UTM
Sophos Certified Engineer - XG
Gold Solution Partner since 2005

MediaSoft, Inc. USA
Cancel
Vote Up 0 Vote Down

Cancel
0 JonMeacham over 5 years ago in reply to BAlfson

Hi Bob, a bit of searching reveals the issue is MTU on the private zone network.

https://community.sophos.com/products/unified-threat-management/f/wireless-security/56513/bad-throughput-after-9-30#pi2353=8

MTU at 1280 solves it, but may cause other issues?

Thought this would have been solved by now

9.603-1 / AP15C

Have logged a support case.

Jon
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 JonMeacham over 5 years ago in reply to BAlfson

Hi Bob, a bit of searching reveals the issue is MTU on the private zone network.

https://community.sophos.com/products/unified-threat-management/f/wireless-security/56513/bad-throughput-after-9-30#pi2353=8

MTU at 1280 solves it, but may cause other issues?

Thought this would have been solved by now

9.603-1 / AP15C

Have logged a support case.

Jon
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data