Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 1681 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

L2TP clients are dog slow when connected through UTM Firmware version:9.601-5

RussellAdams

I recently updated my UTM (running on a small form factor i7 based machine).

 

After updating, internal clients that use L2TP (Cisco Meraki) to connect to other sites are finding terribly slow performance.

 

Nothing in the logs to indicate an issue.  Prior to this, the older UTM firmware worked beautifully.  Any thoughts on how to fix this, aside from reverting to the older OS?

 

Thanks



This thread was automatically locked due to age.
Parents
  • +1

    Do you see anything in the Intrusion Prevention log?  My guess would be that you need an Exception in Intrusion Prevention for anti-UDP flooding for IPsec traffic from your LAN(s).

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • +1

    Do you see anything in the Intrusion Prevention log?  My guess would be that you need an Exception in Intrusion Prevention for anti-UDP flooding for IPsec traffic from your LAN(s).

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML