This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Routing for Remote IP Phones

I am replacing an old firewall (Cisco ASA) with a Sophos SG.  I have set the SG with the same firewall and DNAT rules as the old firewall, but the 2 IP phones that are in remote locations are not working - they cannot connect to the office and the office cannot connect to them.  They work fine with the old firewall connected, and I've confirmed that the rules on the old firewall are identical to the SG (I think).

I've tried looking at the live firewall logs, but see no packets being dropped coming in or going out.

I'm obviously missing something. 

Any thoughts / suggestions would be GREATLY appreciated.  :-)



This thread was automatically locked due to age.
Parents
  • Hi Deb and welcome to the UTM Community!

    Check the Intrusion Prevention log and consider #1 in Rulz.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • Hi Deb and welcome to the UTM Community!

    Check the Intrusion Prevention log and consider #1 in Rulz.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data