Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 6 replies
  • Subscribers 3 subscribers
  • Views 8443 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Open Custom Port on Firewall

Michael Ziminski

Hi, I want to open port 3579 on my UTM so I can use this custom port remote-ing into my PC at home.  The reason why I want the special port created is because I know it's never a good idea to have port 3389 open on your public IP.  I set up the DNAT rule like this: 

I've created the service definition as follows: 

 

 

But it's still not working.  I still can't get connected to it. 

I have also went in manually to the firewall and created the firewall rule, \\but that still doesn't work.  I even tried looking on Advanced Port Scanner and the port is not open. 

 

Any help would be greatly appreciated! 

Thanks in advance!



This thread was automatically locked due to age.
Parents
  • 0

    Good job, Mike - easy to understand at a glance!

    That's what I expected to see - that you did this correctly.  If you tried #2 in Rulz and found nothing, then I'm going to guess that you're testing from inside your home network.  If that's the case, you need a Full NAT instead of a DNAT - see Accessing Internal or DMZ Webserver from Internal Network.  Was that it?

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    Thanks Bob. From what I can tell, there's nothing that I need to do according to #2 in Rulz. I haven't done much with any of the other settings.  And I was trying the rule from my job to my home which has a different public IP.

    But something odd: I am able to RDP into my server from my work PC if I set up the DNAT rule with the Microsoft Remote Desktop Protocol as set up by the wizard. Just the port that I want to create is not working.

  • +1 in reply to Michael Ziminski

    Actually, I'd get rid of DNATs and use Remote Access instead.  I prefer the SSL VPN, but for your purpose, the HTML5 setup for RDP would seem to be ideal.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
  • 0 in reply to BAlfson

    BAlfson said:

    Actually, I'd get rid of DNATs and use Remote Access instead.  I prefer the SSL VPN, but for your purpose, the HTML5 setup for RDP would seem to be ideal.

    Cheers - Bob

     

     

    I sent you a PM.  The custom port that I set up is now working completely out of the blue with no config changes.  Weird..., but I'm glad it's working.  I did set up the HTML5 portal as a backup.  Thanks for all the help!

Reply
  • 0 in reply to BAlfson

    BAlfson said:

    Actually, I'd get rid of DNATs and use Remote Access instead.  I prefer the SSL VPN, but for your purpose, the HTML5 setup for RDP would seem to be ideal.

    Cheers - Bob

     

     

    I sent you a PM.  The custom port that I set up is now working completely out of the blue with no config changes.  Weird..., but I'm glad it's working.  I did set up the HTML5 portal as a backup.  Thanks for all the help!

Children
No Data
Unfiltered HTML