Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 3 subscribers
  • Views 2785 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QOS IPSEC Tunnel

StefanoColombo

I'm looking for info setting up QOS for VPN Tunnels .

We have a tunnel between a UTM9 and a XG firewall , we'd like to configure a QOS rule for the "IPsec tunnel" as whole , first , and in the future ( if possible ) to create qos rule for traffic inside the tunnel .

A few questions.

- on the UTM we need to create a traffic selection policy and apply it to an interface with a bandwith pool .

-  The traffic we need to select is the LAN-to-LAN traffic or the traffic between the two IPSEC endpoints ?

-  Will we need to apply the traffic selection to internal interface , on the first case ?

- enabling the option "keep classification after encapsulation" in the advanced tab will enable us to create qos rules for specific traffic inside the tunnel

 

thanks for any info



This thread was automatically locked due to age.
  • 0

    Ciao Stefano,

    It's possible to QoS the IPsec traffic between the two endpoints.  It's also possible to QoS the LAN-to-LAN traffic inside the tunnel - as you surmised, you must select 'Keep classification after encapsulation'.  Without knowing what problem(s) you're having, it's difficult to make any specific recommendation.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Unfiltered HTML