Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 3 subscribers
  • Views 1614 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

DNAT not working with Sophos XG sitting between L3 devices

Brian Otieno

I have a setup where the Sophos XG sits between a L3 switch and a Cisco router.

ISP links are terminated on the Cisco router.

Vlans for LAN, WLAN and ServerFarm are on the L3 switch.

I am unable to get the DNAT rules to work and don't seem to see where the challenge is...

I have done the same on a Sophos XG that has the Servers Vlan on the Firewall and it works fine.

Kindly assist.



This thread was automatically locked due to age.
Parents
  • 0

    Hi Brian and welcome to the UTM Community!

    Yes, this is not the Community for the XG, so you will want to post this question there.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi Brian and welcome to the UTM Community!

    Yes, this is not the Community for the XG, so you will want to post this question there.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML