Thread Info
  • State Verified Answer
  • Locked Locked
  • Replies 2 replies
  • Subscribers 4 subscribers
  • Views 3336 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

IPS Throughput

NickT

I have a client with an SG230 running 9.508.  Their internet connection is 250/50Mbps cable.  With Intrusion Prevention enabled, their speed test shows at 50/50Mbps.  Disabling Intrusion Prevention gets them their full internet speed.  I have adjusted the attack patterns as shown below.

I have also added the requisite servers in performance tuning.  Anti-portscan is enabled.

What can be done to improve performance?



This thread was automatically locked due to age.
Parents
  • +1

    Hi,

     

    Maybe you should think about the "no time limit".

    With this option, you will enable nearly every ips pattern of the last X years. Most of them are already fixed.

    Read the recommendation of this on the IPS page itself.

     

    Cheers

    __________________________________________________________________________________________________________________

Reply
  • +1

    Hi,

     

    Maybe you should think about the "no time limit".

    With this option, you will enable nearly every ips pattern of the last X years. Most of them are already fixed.

    Read the recommendation of this on the IPS page itself.

     

    Cheers

    __________________________________________________________________________________________________________________

Children
Unfiltered HTML