Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 3 subscribers
  • Views 5610 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LTE (4G) to Ethernet?

Dean Lofthouse

Need some assistance please.
Purchase an Optus branded Huawei branded E5186 wireless broadband router. Flashed successfully and so now have access to bridge mode.
Before setting bridge mode tested internet connection and all is ok.

Now put into bridge mode and connected to my Sophos UTM V9.4 (this has been working for many years connected to my very slow ADSL2 connection with an old d-link modem in bridge mode) I have updated the external interface to show, type, Ethernet with Dynamic IPv4 and gateway selected. Interface shows as UP with IP Addresses assigned. DNS Forwarders are set to ISP and also are showing correct IP. However, no internet??

I can tracert to external IP as shown on the interface, shows not hops in between, but tracert to any other IP e.g. google stops at the UTM DNS/Gateway address and then times out.

Tried various setups with no luck and so hoping someone can assist. Many Thanks.



This thread was automatically locked due to age.
Parents
  • 0

    Have you tried using the 'who-are-we' on your PC in bridge mode? does it work then?

    XG & UTM Architect (Systems: XG v18 & UTM 9.7 - Virtual, HW & SW)
    Curious enough to take it apart, skilled enough to put it back together, Clever enough to hide the extra parts when I'm Done!

  • 0 in reply to Argo

    Hi Jason,

    Can you please provide some more detail and explanation of how to use as I am unfamiliar with what you suggest.

    Thanks

     

  • 0 in reply to Dean Lofthouse

    Hi Dean and welcome to the UTM Community!

    The first thing I would try is an Up2Date to 9.506.  If that doesn't help, try #7.7 in Rulz.  Any luck with either of those?

    Cheers - Bob
    PS I didn't follow Jason's suggestion either.  This exchange reminds me of the old joke about England and the USA - Two peoples separated by a common language! ;-)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0 in reply to Dean Lofthouse

    Hi Dean and welcome to the UTM Community!

    The first thing I would try is an Up2Date to 9.506.  If that doesn't help, try #7.7 in Rulz.  Any luck with either of those?

    Cheers - Bob
    PS I didn't follow Jason's suggestion either.  This exchange reminds me of the old joke about England and the USA - Two peoples separated by a common language! ;-)

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML