Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 3 subscribers
  • Views 4383 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

UDP Port blocked although a rule for this port to allow is built.

MichaelBitsch

I have an Accesspoint on a remote site, that has worked properly for month. Maybe since 9.503-4 the AP cannot find his controller because UDP Port 13907 is dropped. I have rule that alloes this UDP Port tu the controller. WHat is going wrong?

 

Thanks to all.



This thread was automatically locked due to age.
Parents
  • 0

    Hi, Michael, and welcome to the UTM Community!

    I assume that you know these packets are being dropped because you watched the Firewall Live Log.  Alone among the logs, the Firewall Live Log presents abbreviated information in a format easier to read quickly.  Usually, you can't troubleshoot without looking at the corresponding line from the full Firewall log file.  Please post one line corresponding a drop you saw in the Live Log.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    Hi, Michael, and welcome to the UTM Community!

    I assume that you know these packets are being dropped because you watched the Firewall Live Log.  Alone among the logs, the Firewall Live Log presents abbreviated information in a format easier to read quickly.  Usually, you can't troubleshoot without looking at the corresponding line from the full Firewall log file.  Please post one line corresponding a drop you saw in the Live Log.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
Unfiltered HTML