Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 4 replies
  • Answers 1 answer
  • Subscribers 5 subscribers
  • Views 7104 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Update 503-004

AreshAreshi

Hi

Our SG310 running with 9.502-4 firmware and it says the update 9.503-4 downloaded and must be installed. in the FTP site I see

u2d-sys-9.502004-503004

and also the last update shows:

u2d-sys-9.503003-503004

 

I heard that one update was removed from the FTP site, is that the update 9.502004 to 9.503003?

 

Thanks

 



This thread was automatically locked due to age.
Parents
  • 0

    9.503 had a false start, some files were in the wrong folder.   They pulled the kit, corrected the problem, and reissued the kit.  This all happened during soft-release, before it appeared in Up2date.   Thrre is a KB article about the incident which should be amended or removed, because everyone who had the problem should have had it fixed by now.

Reply
  • 0

    9.503 had a false start, some files were in the wrong folder.   They pulled the kit, corrected the problem, and reissued the kit.  This all happened during soft-release, before it appeared in Up2date.   Thrre is a KB article about the incident which should be amended or removed, because everyone who had the problem should have had it fixed by now.

Children
Unfiltered HTML