This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Scanning with a Device in a different VLAN

I've a All-in-one Device (Scanner) -> HP OfficeJet 4500

which is located in VLAN A

now I try to scan from a Computer in VLAN B

 

following the Information from HP for scanning are UDP Port 427 and TCP Ports 9220 and 9500 used.

I created therefore 3 DNAT Rules, but it don't works.

any Idea what I've to change?



This thread was automatically locked due to age.