Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 7 replies
  • Subscribers 5 subscribers
  • Views 13770 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Setup UTM with what Draytek would have called a Routed Subnet

Gordon Taylor

i currently have a small block of IP addresses from Zen 8ips (5 usable ones) and i use the Routed subnet option on the DrayTek router which works great i just assign a real ip to my linux VM and it gets traffic routed to it as expected.

I want to swap my Draytek for a Sophos UTM (Home Edition) its running on a board with 2 Ethernet ports so one to go into the openreach modem (PPoE) and one for the LAN and into the LAN switch.

Can i set Sophos UTM up in a similar mannerto the DrayTek Router with a routed subnet on the LAN side, or possibly over a Tagged VLAN on the lan side as the servers are VMs and can be tagged in Hyper-V no issue.

is this what is called ProxyARP? after having read around a bit on the subject?



This thread was automatically locked due to age.
Parents Reply Children
  • 0 in reply to Gordon Taylor

    Hi,

    you are comparing a simple nat/router with a complex security firewall.

    You cam setup your routes in the UTM and you will also need to create packet filter rules and MASQ/NAT rules.

    If the traffic is incoming then you will need extra rules and dnat/snat rules.

    XG115W - v20.0.2 MR-2 - Home

    XG on VM 8 - v21 GA

    If a post solves your question please use the 'Verify Answer' button.

Unfiltered HTML