Thread Info
  • State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 3 subscribers
  • Views 4181 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Steps for QoS on home network?

yeleek

Hi,

 

I'm using version 9.411-3.

 

I've read a number of forum posts but cannot get it right.  I'd like to implement QoS so that certain machines have a bandwidth limit (per device), basically the goal is to stop the kids videos, games, etc from slowing the network down for the rest of us.

 

My UTM has three interfaces (WAN, LAN & Wifi).  Wifi is using a range of 192.168.2.x, and I've created a group containing 3 devices with assigned ip addresses in the 192.168.2.x range.

 

How please can I limit their upload and download to say 1024kbits?  I've read about assigning different bandwidth rules to the WAN and Wifi, but its not working.  I should say I'm using the transparent proxy functionality as well to stop them visiting inappropriate sites.

 

Simple generic steps would be great please.

 

Thank you in advance



This thread was automatically locked due to age.
Parents
  • 0

    So, here's the problem: when using Web Filtering, the "client" is not the individual device behind the UTM, it's the UTM itself.  If identifying the external IPs of the sources of this traffic is too difficult, then you will need to use Traffic Selectors that control by Application.  Source will be "Internet" and Destination will be "External (Address)" or you can use the default Any/Any.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Reply
  • 0

    So, here's the problem: when using Web Filtering, the "client" is not the individual device behind the UTM, it's the UTM itself.  If identifying the external IPs of the sources of this traffic is too difficult, then you will need to use Traffic Selectors that control by Application.  Source will be "Internet" and Destination will be "External (Address)" or you can use the default Any/Any.

    Cheers - Bob

     
    Sophos UTM Community Moderator
    Sophos Certified Architect - UTM
    Sophos Certified Engineer - XG
    Gold Solution Partner since 2005
    MediaSoft, Inc. USA
Children
No Data
Unfiltered HTML