Thread Info
  • State Suggested Answer
  • Locked Locked
  • Replies 11 replies
  • Answers 1 answer
  • Subscribers 4 subscribers
  • Views 19910 views
  • Users 0 members are here
Options
Suggested
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Does the Slave node do dhcp requests on the internet interface?

Marc Gorisek

Hi,

I've got a UTM9 with active HA. 

I get messages about:

[INFO-107] WebAdmin webserver not running - restarted

WebAdmin webserver not running - restarted

--

HA Status          : HA SLAVE (node id: 2)

System Uptime      : 0 days 0 hours 0 minutes

System Load        : 0.14

System Version     : Sophos UTM 9.411-3


Please refer to the manual for detailed instructions.

I've found out, that the slave node is doing a dhcp request on it's internet device. How can I disable it?

Cheers Marc



This thread was automatically locked due to age.
Parents
  • 0

    This should not happen.

    I learn "all interfaces -except HA link- are completely inactive".

    why you think the traffic is from slave?

    how is your design?

    which MAC do you see ... (one of the physical MAC's from UTM or the virtual MAC)?


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

  • 0 in reply to dirkkotte

    > why you think the traffic is from slave?

    I've logged in on the slave node via SSH and looked into the logfiles. 

    selfmonng showed me the restart of the WebAdmin webserver. And in syslog.log I've found an entry at the same time that the dhcp client is getting a new ip address on this interface (renewal).

    On the slave node a dhcp-client process is running, although the interface is marked as down in 'ip l'.

  • 0 in reply to Marc Gorisek

    do you use "ha_utils ssh" to ssh into slave?

    some logfiles are synced between nodes. so the dhcp message may be from master...

    nearly all services are active at slave too, so failover need less time.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Reply
  • 0 in reply to Marc Gorisek

    do you use "ha_utils ssh" to ssh into slave?

    some logfiles are synced between nodes. so the dhcp message may be from master...

    nearly all services are active at slave too, so failover need less time.

     


    Dirk

    Systema Gesellschaft für angewandte Datentechnik mbH  // Sophos Platinum Partner
    Sophos Solution Partner since 2003
    If a post solves your question, click the 'Verify Answer' link at this post.

Children
No Data
Unfiltered HTML